Types of drawings for building design

Time:01-01-1970   From:   Category :Technical Service

From: https://www.designingbuildings.co.uk/wiki/Types_of_drawings_for_building_design



As-built drawings and record drawings

On building projects, it is common for changes to be made during construction because of circumstances that emerge on site. As a result, it is common for as-built drawings to be prepared, either during the construction process or when construction is complete, to reflect what has actually been built.

The contractor will generally mark up changes to the ‘final construction issue’ drawings on-siteusing red ink, and these can then be used by the consultant team to create record drawingsshowing the completed project.

For more information see: As-built drawings and record drawings.

Assembly drawings


Assembly drawings can be used to represent items that consist of more than one component. They show how the components fit together and may include, orthogonal planssections and elevations, or three-dimensional views, showing the assembled components, or an exploded view showing the relationship between the components and how they fit together.

For more information see: Assembly drawing and Exploded view.

Block plan

Block plans usually show the siting of a project in relation to Ordnance Survey Maps. Conventions are used to depict boundaries, roads and other details. Depending on the size of the project, recommended scales are:

  • 1 : 2500
  • 1 : 1250
  • 1 : 500


For more information, see Block plan.

Component drawings

Generally, components are ‘self-contained’ and sourced from a single supplier, typically the complete unit provided by that supplier rather than its constituent parts. Component drawingsprovide detailed information about the individual units. They may be drawn at large scales such as; 1:10, 1:5, 1:2, 1:1, and so on. They may include information such as componentdimensions, constructiontolerances, and so on.

For more information see: Component drawing.

Concept drawings/sketches

Slough bus station sketch.png

Concept drawings or sketches are drawings, often freehand, that are used as a quick and simple way of exploring initial ideas for designs. They are not intended to be accurate or definitive, merely a way of investigating and communicating design principles and aesthetic concepts.

For more information see: Concept drawing.

Construction drawings/working drawings

Working drawings or construction drawings provide dimensioned, graphical information that can be used; by a contractor to construct the works, or by suppliers to fabricate components of the works or to assemble or install components. Along with specifications and bills of quantitiesor schedules of work, they form a part of the 'production information', that is prepared by designers and passed to the construction team to enable a project to be constructed.

For more information see: Construction drawing and working drawing

Design drawings

Design drawings are used to develop and communicate ideas about a developing design. In the early stages they might simply demonstrate to the client the ability of a particular design team to undertake the design. They may then be used to develop and communicate the brief, investigate potential sites and assess options, develop the approved idea into a coherent and co-ordinated design, and so on.

For more information see: Design drawings.

Detail drawings

Detail drawings provide a detailed description of the geometric form of a part of an object such as a buildingbridgetunnel, machine, plant, and so on. They tend to be large-scale drawingsthat show in detail parts that may be included in less detail on general arrangement drawings.

For more information see: Detail drawing.

Electrical drawing


An electrical drawing, also known as a wiring diagram, is a type of technical drawing that provides visual representation and information relating to an electrical system or circuit. They are used to convey the engineering design to the electricians or other workers who will use them to help install the electrical system.

For more information, see Electrical drawing.


Typical elevations drawing.png

The term ‘elevation’ refers to an orthographic projection of the exterior (or sometimes the interior) faces of a building, that is a two-dimensional drawing of the building’s façades. As buildings are rarely simple rectangular shapes in plan, an elevation drawing is a first angle projection that shows all parts of the building as seen from a particular direction with the perspective flattened. Generally, elevations are produced for four directional views, for example, north, south, east, west.

For more information see: Elevations.

Floor plans

Typical house ground floor plan.png

Floor plans are a form of orthographic projection that can be used to show the layout of roomswithin buildings, as seen from above. They may be prepared as part of the design process, or to provide instructions for construction, often associated with other drawingsschedules, and specifications.

For more information see: Floor plan.

Engineering drawing

An engineering drawing is a type of technical drawing used to define the requirements for engineering products or components. Typically, the purpose of an engineering drawing is to clearly and accurately capture all geometric features of a product or component so that a manufacturer or engineer can produce the required item.

For more information see: Engineering drawing.

Location drawings/general arrangement drawings

General arrangement drawings (GA’s, sometimes referred to as location drawings) present the overall composition of an object such as a building. Depending on the complexity of the building, this is likely to require a number of different projections, such as plans, sections and elevations, and may be spread across several different drawings.

For more information see: General arrangement drawing.

Installation drawings

Installation drawings present the information needed by trades to install part of the works. This may be particularly important for complex installations such as plant roomsdata centresventilation systemsunderfloor heating, and so on.

For more information see: Installation drawing.

Location plan

Typical location plan.png

location plan is a supporting document that may be required by a planning authority as part of a planning application. A location plan provides an illustration of the proposed developmentin its surrounding context.

For more information, see Location plan.


Perspective drawing is a technique for depicting three-dimensional volumes and spatial relationships based on the eye level and vanishing point (or points) of the viewer. It can give a realistic impression of what a volume or space will look like in reality.

Constructing perspective drawings of buildings is extremely complicated, but has been much simplified recently by the development of computer aided design (CAD), building information modelling (BIM) and other forms of computer generated imagery (CGI).

Perspective section drawing.JPG

To find out more about perspective, see: The origins of perspective.

Scale drawing

Scale drawing is a generic term used to describe any drawing that illustrates items at less than (or more than) their actual size. This is generally necessary where the items is so large or small that it is not useful or convenient to draw it at its actual size.

For more information see: Scale drawing.

Section drawings

Architectural section drawing.jpg

section drawing shows a view of a structure as though it had been sliced in half or cut along another imaginary plane. This can be useful as it gives a view through the spaces and surrounding structures (typically across a vertical plane) that can reveal the relationships between the different parts of the buildings that might not be apparent on plan drawings.

For more information see: Section drawings.

Shop drawings

Shop drawings might be prepared by contractorssubcontractorssuppliersmanufacturers or fabricators. They generally relate to pre-fabricated components, showing how they should be manufactured or installed. They take design intent drawings and specifications prepared by the project design team and develop them to show in detail how the component will actually be manufactured, fabricated, assembled or installed.

For more information see: Shop drawing

Site plans

Typical site plan.png

site plan is a large-scale drawing that shows the full extent of the site for an existing or proposed developmentSite plans, along with location plans, may be necessary for planning applications. In most cases, site plans will be drawn up following a series of desk studies and site investigations.

For more information see: Site plan.

Technical drawings

The term ‘technical drawing’ has a very broad meaning, referring to any drawing that conveys the way that something functions or how it is constructed. Technical drawings are intended to convey one specific meaning, as opposed to artistic drawings which are expressive and may be interpreted in a number of ways. Most drawings prepared during the design and construction of buildings might be considered to be technical drawings.

For more information see: Technical drawing.

Related articles on Designing Buildings Wiki

Previous:GB/T 1591-2018 High strength low alloy structural steels
Next:Types of Drawings prepared by Structural Engineers